-
-
- Shoe Production Line Series
- Toe Lasting And Heel Lasting Machines
- Shoe Moulding Machines
- Sole Press Machines
- Shoe Upper Steaming And Softening Machines
- Shoe Steam Heat Setting And Chill Setting Machines
- Shoe Heel Nailing Machines
- Shoe Flattening And Hammering Machines
- Shoe Roughing And Polishing Machines
- Insole And Outsole Making Machines
- Shoe Upper Making Machines Series
- Shoe Sewing Machines
- Leather Measuring And Inspection Machines
- Shoe Cementing Machines
- Others Shoemaking Machines
- Leather Production Machinery
- Shoe Machine Accessories And Tools
-
-
-
-
-
Automatic pneumatic shoe last pulling machine, shoe delasting machine
1. This machine is suitable for sports shoes, overshoes, low top shoes and middle top shoes.
2. The machine adopts photoelectric induction and foot switch to control the pneumatic system to complete the complete set of last system. After putting the last into the positioning seat, the photoelectric induction sends a signal to the air cylinder for action, sends the tongue to the specified position, puts the upper into the working position, and steps down the foot switch. The pneumatic completes the last setting action according to the set time. The operation is simple and the efficiency is high.
3. The computer pneumatic all-in-one machine is adopted, which is simple and easy to operate. Both men and women can set last, saving time and labor, improving efficiency and increasing production capacity. The power is the electronic automatic control of the cylinder into the last, which is easy, convenient and accurate. Cylinder multi-stage positioning and infrared positioning operation to improve the accuracy of upper into last. It adopts precision processing and energy-saving electronic control components, with high use and durability. This machine is equipped with high-pressure air storage tank, and the operation air source and power are smooth.
Operating instructions:
1. Turn on the 220 volt power supply.
2. Adjust the total air pressure (triplet) to 4 * 6kg air pressure.
3. Adjust the last assembly according to the size of finished shoes, and set the photoelectric delay switch on the touch screen.
4. The push-pull last assembly adopts rubber mold, and the up and down action radian is strong without damaging the shoe machine.
|
MODEL |
Dimensions(LWH) |
Packing size(LWH) |
Weight |
Production |
Power |
Voltage |
|
DF-328A |
490*500*1260 |
500*510*1380 |
70kg |
800pairs/10H |
0.2kw |
220V |
